Sidemount Light Offer
£1,310.00 RRP £1,867.00 In StockPlease note: This item cannot be shipped outside the European Union - learn more
The Apeks Sidemount Light Offer combines the DST XTX50 sidemount regulator set with the streamlined and low profile WSX-25 wing for a neat and light sidemount set.
The Apeks Sidemount Regulator Set is a top notch pair of regs for sidemount stages which includes two complete Apeks XTX50 DST regulators with fifth port upgrade kits fitted and appropriate length hoses. Easily customisable the XTX50 and DST combinations allow you to tailor your regs to your needs.
The Apeks DST first stage is a fully balanced diaphragm design with environmental seal to improved cold water protection. The standard four low pressure and been upgraded with the fifth port upgrade to allow for optimal hose routing of the inflator hoses to either drysuit and/or buoyancy device. The swivelling low pressure turret is also ideal, allowing for the best possible positioning of the regulator hoses.
Rugged & Adjustable
The Apeks XTX50 second stage provides excellent performance, even in the harshest of conditions thanks to carefully engineering. A heat sink at the hose coupling point helps to raise the temperature of the air flow, reducing the risk of the cold air flowing over metal components and causing ice to form. A fully adjustable balanced valve allows for diver customisation and preferences whilst the venturi control helps to prevent accidental free flow when the regulator isn't in use and maximum performance when needed.
Please note that the package in only available in DIN 300 Bar
This Apeks Sidemount Package includes:
- 2 x XTX50 second stage
- 2x sets of interchangeable small exhaust covers (large fitted)
- 5x cable ties for clip and accessory attachment
- 1x 70cm bungee cord for second stage necklace and hose restraint
- 2x DST first stage DIN 300 Bar with 5th port upgrade fitted
- 1x 60cm regulator hose
- 1x 210cm regulator hose
- 2x 20m Black Flexi inflator hose
- 1x 90 degree fixed elbow
- 2x Black Face 52mm SPG and 20cm HP hose
- 1x 75mm stainless steel bolt snap
- 5x O-rings for use with bungee cords
- Apeks Tech Reg Bag
- Weight approx : 3.40kg
The Apeks WSX-25 Sidemount Harness is a one-size-fits-all sidemount rig with a low profile wrap-around bladder with a customisable 2" webbing harness. The whole rig is modular, made from high grade materials and has a very minimalist design. After 11/08/2017 the WSX-25 will have an updated bladder with an upper dump valve.
Trapezoid Wraparound Bladder is made to be low profile and snag resistant so you can fit through smaller gaps with ease. The bladder can be removed and moved up and down the spine to suit you or left off completely. The trapezoid shape keeps any buoyancy in the small of your back for good trim and the two sides wrap around the diver with a bungee loop around the front. The inflator hose can be mounted on the left or right and pass up under the arm connected to a shoulder D-Ring. A central pull dump lets you dump air in a horizontal position.
Integrated Weights along the spine under the bladder hold lead and can be moved up and down the spine for trim. You can also thread solid lead blocks over the shoulders if you need to shift weight further forward.
- 27lbs lift
- Armoguard exterior
- Additional protective layer of Armoguard protects the bladder against abrasions in confined spaces
- Reversible inflator can be mounted on left or right side
- Grommets at lower corners allow for mounting bungee to keep the bladder streamlined to your body
- Solid 2" (5cm) webbing comes pre-assembled
- Removable crotch strap made of 2" (5cm) soft webbing
- 4x two inch stainless steel D-rings (2 angled on shoulders, 1 angled and 1 flat on the crotch strap)
- 2x "SlideLock" sliding stainless steel D-rings on waist strap allow for easy adjustment of cylinders throughout the dive
- 2x stainless steel drop D-rings along the lower back are for connection to the the included butt pack, or for marker buoys, reels or other accessories
- Heavy-duty waist buckle made of stainless steel
- Two-piece stainless steel plate allows the torso length to be adjusted to fit any diver
- Zippered Butt Pack with stainless steel snap hooks included
- Weight pouch is mounted on the spine strap and holds over 18lbs (9kgs) of weight
- Comes complete with 2 sizes of bungee and 5 stainless steel snap hooks
- 2 grommet strips allow the diver to adjust the weight pouch and bladder based on their specific requirements
- One size fits all
- Two piece stainless steel
- Stainless steel / total of 6
- Stainless steel
Accessory butt pack Included
Airway holddown Bungee with bolt snap
Crotch strap Yes, removable
Bungee Yes, 2 sizes of bungee are included
Weight pouch 3x 3kgs (18lbs)
Grommet strip 2 included
We offer free standard delivery on orders over £50.
Standard delivery is £3.70 for orders under £50. You will receive your order 2 - 4 days from the date of despatch.
Next Working Day is £6.50.
We hope you will be completely satisfied with any product purchased from Simply Scuba.
However, you can return it for any reason within 28 days from the date of despatch for a full refund (less postage costs).