Superflow 56cm Hose
The Scubapro Superflow 56cm Hose is a high airflow hose for your regulator with a large, smooth internal bore so it won't restrict air flow. The rubber outer shell both protects the inner hose and adds some weight to the hose so they don't float in the water.
3/8" male thread will fit most regulator 1st stages today (except some Mares and older Apeks that use a 1/2" thread but you can read more about thread sizes here) and the female end is the universal 9/16” that fit all second stages without a swivel or special connection.
The female end is fitted with a high torque nut that requires a special tool to tighten properly.
56cm is a handy length for a short hose alternate that sits on a necklace around your neck on a twin set for a smaller diver. Short enough that you don't have excess slack on the hose but long enough to reach over your shoulder and into your mouth. Bigger divers may consider a 64cm hose for a bit more movement and slack.
For single cylinder primary 2nd stages most use a 75cm Hose as a standard length.
Scubapro Superflow 56cm Hose - Features
?This is the tread that the regulators second stage or pressure gauge will screw into.
?This is the thread on the hose that will screw into the regulators first stage
We offer free standard delivery on orders over £50.
Standard delivery is £3.70 for orders under £50. You will receive your order 2 - 4 days from the date of despatch.
Next Working Day is £6.50.