Alpha 10 Octopus
Out Of Stock
The Oceanic Alpha 10 Octopus is a tough and simple octo made to compliment their range of regulators. Pneumatically balanced you'll get a steady flow of gas at any depth with a large purge button and a Venturi system that interrupts freeflows before they occur.
- Valve Type Pneumatically balanced demand
- Mouthpiece Type Orthodontic w/ Bite Tabs
- Dimensions (Front Profile) 2.66 inch diameter (circular)
- Service Interval 2 Year, Required
Oceanic Alpha 10 Octopus - Features
?This feature allows the diver to adjust the inhalation setting from the set level and increase the effort required to open the 2nd stage valve to deliver air.
?The venturi control affects how air flows in the 2nd stage. In it's positive position the flow of gas creates a vacuum against the diapragm, helping to open the valve. In it's negative position it will divert gas back against the diaphragm helping to close the valve. It is basically used to help prevent free flowing.
|Cold Water Rated|
?Cold water has adverse effects on regulators and can cause some to freeze so each regulator combination must be tested during manufacturing for their performance in different water temperatures.
Cold water is defined by EN250 as below 10°C. If a regulator combination cannot meet the performance standards below 10°C then they are only suitable for warm waters.
EN250 / (EN250A >10°C)
To pass the regulator must provide at least 62.5 L/min of air at 50M depth above 10°C.
|Cold & Warm Water|
?Environmentally sealed 1st stages offer greater protection against freezing when diving in cold water (below 10 degrees C)
Scubapro have a new method of cold water proofing their first stages called the eXtended Thermal Insulating System or XTIS which still allows water into the first stage but the internal parts that come into contact with the water are coated to prevent ice from forming.
?Unbalanced regulators are affected by the pressure in the cylinder, becoming slighty harder to breathe from when the pressure starts to drop.
Balanced regulators are not affected by the cylinder pressure or depth.
Over-balanced regulators achieve unprecedented performance by increasing your air supply the deeper you go providing the best breathe for deep divers.
|High Pressure Ports|
?High pressure ports supply the pressure gauge and wireless transmitters for dive computers
|Low Pressure Ports|
?Low pressure ports supply the 2nd stages and inflator hoses
?All regulators need to be serviced to keep them in working order as the parts inside them age and wear over time and with use. Most regulators need to be serviced once a year or after 100 dives with normal recreational use to replace parts and re-balance.
Some regulators use more modern materials or mechanisms that allow them to extend the servicing interval that can save you some money in the long run.
|1 Year - 100 Dives|
We offer free standard delivery on orders over £50.
Standard delivery is £3.70 for orders under £50. You will receive your order 2 - 4 days from the date of despatch.
Next Working Day is £6.50.
We hope you will be completely satisfied with any product purchased from Simply Scuba.
However, you can return it for any reason within 28 days from the date of despatch for a full refund (less postage costs).