Legend Supreme Stage 3 Regulator
£390.00 RRP £506.00 In StockPlease note: This item cannot be shipped outside the European Union - learn more
The Aqua Lung Legend Supreme is a cold water rated environmentally sealed regulator with additional cold water features.
The new Aqua Lung Legend is smaller and lighter than the old model, providing a more comfortable dive. The balanced diaphragm first stage offers exceptional performance at any depth, cylinder pressure or condition and the added benefit of the environmental seal helps prevent cold conditions from affecting the first stage reliability.
The Legend Supreme second stage is fitted with additional cold water measures including heat exchangers and a lip shield (which can be easily removed) but most importantly it has been specially adjusted to resist freezing. A venturi switch provides control of freeflow on the surface and whether the regulator isn't in use. A redesigned exhaust deflector provides better dispersion and easier exhalation.
- Diaphragm first stage
- Environmentally sealed Balance Chamber
- Braided hose
- Heat exchangers
- Venturi control
- 4 low pressure ports
- 2 high pressure ports
ABOUT Aqua Lung
Aqualung have been industry leaders producing a range of diving equipment from regulators and computers to drysuits, wetsuits and masks.
Aqualung have been producing dive equipment since 1943, started by Jacques-Yves Cousteau and Émile Gagnan who introduced the world to scuba diving and the Aqua-Lung.
Aqua Lung Legend Supreme Stage 3 Regulator - Features
?This feature allows the diver to adjust the inhalation setting from the set level and increase the effort required to open the 2nd stage valve to deliver air. Close.
?The venturi control affects how air flows in the 2nd stage. In it's positive position the flow of gas creates a vacuum against the diapragm, helping to open the valve. In it's negative position it will divert gas back against the diaphragm helping to close the valve. It is basically used to help prevent free flowing. Close.
|Cold Water Rated|
?Cold water has adverse effects on regulators and can cause some to freeze so each regulator combination must be tested during manufacturing for their performance in different water temperatures.
Cold water is defined by EN250 as below 10°C. If a regulator combination cannot meet the performance standards below 10°C then they are only suitable for warm waters.
EN250 / (EN250A >10°C)
To pass the regulator must provide at least 62.5 L/min of air at 50M depth above 10°C. Close.
|Cold & Warm Water|
?Environmentally sealed 1st stages offer greater protection against freezing when diving in cold water (below 10 degrees C)
Scubapro have a new method of cold water proofing their first stages called the eXtended Thermal Insulating System or XTIS which still allows water into the first stage but the internal parts that come into contact with the water are coated to prevent ice from forming. Close.
?Unbalanced regulators are affected by the pressure in the cylinder, becoming slighty harder to breathe from when the pressure starts to drop.
Balanced regulators are not affected by the cylinder pressure or depth.
Over-balanced regulators achieve unprecedented performance by increasing your air supply the deeper you go providing the best breathe for deep divers. Close.
|High Pressure Ports|
?High pressure ports supply the pressure gauge and wireless transmitters for dive computers Close.
|Low Pressure Ports|
?Low pressure ports supply the 2nd stages and inflator hoses Close.
We offer free standard delivery on orders over £50.
Standard delivery is £3.95 for orders under £50. You will receive your order 2 - 4 days from the date of despatch. Order by 3pm on a working weekday and we will aim to despatch the same day.
Next Working Day is £6.95.
We hope you will be completely satisfied with any product purchased from Simply Scuba.
However, you can return it for any reason within 28 days from the date of despatch for a full refund (less postage costs).
Royal Mail tracked return option within the UK for your convenience.