Legend LUX Supreme Stage 3 Regulator
£544.00 RRP £827.00 In StockPlease note: This item cannot be shipped outside the European Union - learn more
The Aqua Lung Legend LUX Supreme is the best performing regulator AquaLung make with a black PVD finish and bronze details that look beautiful and improve the durability and harness. AquaLung's ACD keeps water out of your 1st stage even when disconnected and environmental sealing improves coldwater performance.
The striking Legend LUX Black and finish provides a tougher coating than traditional chrome plating to help protect these regulators whilst providing a very stylish look. The first stage is a balanced diaphragm design with the added benefit of an environmentally sealed balance chamber for improved cold water use and reliability. Four low pressure and 2 high pressure ports offer good flexibility for hose routing and attachment for cold water diving.
The second stage is connected with a flexible yet tough braided hose with offer a longer life than a standard rubber hose and also protects the hose from UV damage. A heat exchanger is fitted next to the second stage to warm the air flow as it enters the second stage, helping to prevent freezing and free flows. The new legend has been redesigned to be smaller and lighter, offering a more comfortable dive. The new MBS (Master Breathing System) allows dual control over the air flow within the second stage (venturi) and also the inhalation effort.
The Supreme models have also been specially adjusted to resist freezing in extreme cold conditions.
- Diaphragm first stage
- Environmentally sealed
- Braided Hose
- 4 low pressure ports
- 2 high pressure ports
- Heat exchanger
- Removable lip shield
- MBS (Master Breathing System)
- DIN 1.04kg
ABOUT Aqua Lung
Aqualung have been industry leaders producing a range of diving equipment from regulators and computers to drysuits, wetsuits and masks.
Aqualung have been producing dive equipment since 1943, started by Jacques-Yves Cousteau and Émile Gagnan who introduced the world to scuba diving and the Aqua-Lung.
Aqua Lung Legend LUX Supreme Stage 3 Regulator - Features
?This feature allows the diver to adjust the inhalation setting from the set level and increase the effort required to open the 2nd stage valve to deliver air.
?The venturi control affects how air flows in the 2nd stage. In it's positive position the flow of gas creates a vacuum against the diapragm, helping to open the valve. In it's negative position it will divert gas back against the diaphragm helping to close the valve. It is basically used to help prevent free flowing.
|Cold Water Rated|
?Cold water has adverse effects on regulators and can cause some to freeze so each regulator combination must be tested during manufacturing for their performance in different water temperatures.
Cold water is defined by EN250 as below 10°C. If a regulator combination cannot meet the performance standards below 10°C then they are only suitable for warm waters.
EN250 / (EN250A >10°C)
To pass the regulator must provide at least 62.5 L/min of air at 50M depth above 10°C.
|Cold & Warm Water|
?Environmentally sealed 1st stages offer greater protection against freezing when diving in cold water (below 10 degrees C)
Scubapro have a new method of cold water proofing their first stages called the eXtended Thermal Insulating System or XTIS which still allows water into the first stage but the internal parts that come into contact with the water are coated to prevent ice from forming.
?Unbalanced regulators are affected by the pressure in the cylinder, becoming slighty harder to breathe from when the pressure starts to drop.
Balanced regulators are not affected by the cylinder pressure or depth.
Over-balanced regulators achieve unprecedented performance by increasing your air supply the deeper you go providing the best breathe for deep divers.
|High Pressure Ports|
?High pressure ports supply the pressure gauge and wireless transmitters for dive computers
|Low Pressure Ports|
?Low pressure ports supply the 2nd stages and inflator hoses
?All regulators need to be serviced to keep them in working order as the parts inside them age and wear over time and with use. Most regulators need to be serviced once a year or after 100 dives with normal recreational use to replace parts and re-balance.
Some regulators use more modern materials or mechanisms that allow them to extend the servicing interval that can save you some money in the long run.
|1 Year - 100 Dives|
|Weight in Grams (approx)|
?The weight includes the first stage (DIN fitting), hose and second stage.
We offer free standard delivery on orders over £50.
Standard delivery is £3.70 for orders under £50. You will receive your order 2 - 4 days from the date of despatch.
Next Working Day is £6.50.