The AquaLung Argonaut Dive Knife combines simplicity with rugged materials for one of the best and toughest dive knives on the market. A single piece of titanium is forged into a corrosion resitant, lightweight superstrong dive knife.
Full Tang Titanium Blade is made from a single piece of 4mm titanium so there are no joins or weak points to come loose or break. The whole knife is then coated in Electrophoretically Deposited Paint, EDP, for a tough black finish which is then laser etched before the blade is sharpened. The butt of the knife is pointed for use as a glass breaker in an emergency and the handle has skeletoned holes that can be used as hex wrenches.
5mm Paracord Handle wrapped twice for a nice grip that can be used for a whole range of situations in an emergency and is tied off with a 5" leash. Wrapped a 1/2" from the hilt to provide a spot for the forefinger and extra grip for the sheath.
2mm Kydex Plastic Sheath is thermoformed around the blade to make a secure sheath for your Argonaut with multiple 3mm attachment points and slots for threading straps before the logo is laser etched onto the exterior.
Spartan and Blunt Tips for your choice of cutting tool; the Spartan Tip with a spear head pointwith one side featuring rounded die cut serrations to prevent snags on rope and the Blunt Tip with a blunted chisel tip for prying and turning screws with a full serrated edge of die cut rounded serration.
Don't forget to valtdate your warranty by visiting the Manufacturers Warranty | Registration Page
- Blade and Handle are made of 4mm thick, high rust resistant Titanium.
- The handle is double wrapped in 5mm paracord.
- The blade comes in 2 styles, Spartan and Blunt.
- The blade is 4 7/8" (12.38cm) long and the handle is 4 7/8" (12.38cm)
- The butt of the handle comes to a point for hammering, braking and crushing.
- The sheath is a locking 2mm thick Kydex with 1/8" grommets. The strap holes are 1" (2.5cm) long and 1/4" (.65cm) wide.
- Comes with 2 rubber leg straps.
Overall length : 246mm
Blade Length : 124mm
Weight Incl. Sheath : 140g
ABOUT Aqua Lung
Aqualung have been industry leaders producing a range of diving equipment from regulators and computers to drysuits, wetsuits and masks.
Aqualung have been producing dive equipment since 1943, started by Jacques-Yves Cousteau and Émile Gagnan who introduced the world to scuba diving and the Aqua-Lung.
?Whether the knife can be fitted to a BCD using supplied pins or thumb screws. Close.
?Wether the knife can be fitted on to a belt or other length of webbing Close.
|Blade length (mm)|
?The length of the cutting section Close.
?Whether the knife can be fitted to a hose using supplied attachments Close.
?Whether the knife can be fitted to the leg using suppled straps Close.
|Line Cutting Notch|
?Some knife blades include a specially designed notch for cutting most forms of line or thin rope. Line is much easier to cut in a controlled manner when using the notch instead of slicing the line or rope using the sharpened edge of the blade. Close.
?The overal length of the knife, cutter or shears. This length is measured with the sheath in place. Close.
?A serrated edge makes it easier to cut through some materials, acting more like a saw than a straight blade. Close.
?Sheaths are typcially made from either plastic or webbing. Plastic housings offer impact protection and will incorporate a locking mechanism to help prevent accidental lose of the knife. Webbing sheaths are normally supplied with smaller, low profile back-up knifes and cutter and usually use a velcro tab to retain the knife or cutter. Close.
?Standard knife blades are usually available with either a point or blunt tip. A pointed tip holds more a risk of accidental punction of other equipment or injury. A blunt tip reduces the risk of accident damage and is also handy as a lever if you need to pry something open. Close.
Please note: This item cannot be shipped outside the United Kingdom