1. Home
  2. Apeks
  3. Apeks XTX200 Plus XTX50 Octo Set


XTX200 Plus XTX50 Octo Set

£549.00 RRP £732.00 SKU: 65175-2

Play button Created with Sketch.
Apeks XTX200 Plus XTX50 Octo Set
Apeks XTX200 Plus XTX50 Octo Set Apeks XTX200 Plus XTX50 Octo Set Apeks XTX200 Plus XTX50 Octo Set Apeks XTX200 Plus XTX50 Octo Set

XTX200 Plus XTX50 Octo Set

£549.00 RRP £732.00 SKU: 65175-2

Email When Available
Please select from the available options
Add to basket
Size Guide
More Colours Available Spend £50.00 to get free UK delivery
Add to wishlist

Earn loyalty points

equivalent - Find out more

Buy, Review, & Win!

Find out more


XTX200 Plus XTX50 Octo Set

Added To Basket

View / Edit Basket

Finance Available At Simply ScubaFinance Available At Simply Scuba



Delivery / Returns



XTX200 Plus XTX50 Octo Set

£549.00 RRP £732.00 In Stock

Brand: Apeks

Model: XTX200 Plus XTX50 Octo Set

SKU: 65175-2

Please note: This item cannot be shipped outside the European Union - learn more

The Apeks XTX200 Plus XTX50 Octo Set combines their best regulator with their best Octo for a high quality regulator set that delivers a smooth breathe at all depths and water temperatures. At home both in warm and cold waters the FSR+200+50 combination just needs a pressure gauge and inflator hose to complete the set.


The FSR first stage uses an Over-Balanced diaphragm design for high performance and air flow at any depth and cylinder pressure. Air is supplied via four low pressure and two high pressure ports configured in easy hose routing positions. Cold water protection is provided by using a dry Environmental Seal to prevent ice crystal forming on the main spring and critical components that could lead to a free flow. The seal also provides contamination and chemical damage protection for soft material parts such as o-rings and the diaphragm.


The XTX 200 second stage features an inlet Heat Exchanger combined with a full metal valve body to improved cold dissipation. Venturi Control is provided via a lever on the side of the housing to control air flow within the second stage. Inhalation Resistance can also be adjusted by using the external control knob to increase the resistance required to open the valve if needed by the diver.


The XTX 50 Octopus has a balanced valve for performance, an inlet Heat Exchanger, full metal valve barrel, Venturi and Inhalation Control to ensure performance and reliability even in extreme cold conditions.


Prescription Lenses

Please Note this package DOES NOT INCLUDE a BCD or Drysuit LPI hose. These come with your BCD or Drysuit or can be purchased Here

Remember to validate your warranty by visiting the manufacturers warranty registration | website

View product manual View product manual
Read More
Read Less

Apeks XTX200 Plus XTX50 Octo Set - Features

FeatureProduct Specification
Adjustable Inhalation
?This feature allows the diver to adjust the inhalation setting from the set level and increase the effort required to open the 2nd stage valve to deliver air.
Adjustable Venturi
?The venturi control affects how air flows in the 2nd stage. In it's positive position the flow of gas creates a vacuum against the diapragm, helping to open the valve. In it's negative position it will divert gas back against the diaphragm helping to close the valve. It is basically used to help prevent free flowing.
Cold Water Rated
?Cold water has adverse effects on regulators and can cause some to freeze so each regulator combination must be tested during manufacturing for their performance in different water temperatures.

Cold water is defined by EN250 as below 10°C. If a regulator combination cannot meet the performance standards below 10°C then they are only suitable for warm waters.

EN250 / (EN250A >10°C)
To pass the regulator must provide at least 62.5 L/min of air at 50M depth above 10°C.
Cold & Warm Water
Environmentally sealed
?Environmentally sealed 1st stages offer greater protection against freezing when diving in cold water (below 10 degrees C)

Scubapro have a new method of cold water proofing their first stages called the eXtended Thermal Insulating System or XTIS which still allows water into the first stage but the internal parts that come into contact with the water are coated to prevent ice from forming.
First Stage
?Unbalanced regulators are affected by the pressure in the cylinder, becoming slighty harder to breathe from when the pressure starts to drop.

Balanced regulators are not affected by the cylinder pressure or depth.

Over-balanced regulators achieve unprecedented performance by increasing your air supply the deeper you go providing the best breathe for deep divers.
High Pressure Ports
?High pressure ports supply the pressure gauge and wireless transmitters for dive computers
Low Pressure Ports
?Low pressure ports supply the 2nd stages and inflator hoses
Service Information
?All regulators need to be serviced to keep them in working order as the parts inside them age and wear over time and with use. Most regulators need to be serviced once a year or after 100 dives with normal recreational use to replace parts and re-balance.

Some regulators use more modern materials or mechanisms that allow them to extend the servicing interval that can save you some money in the long run.
1 Year - 100 Dives
Weight in Grams (approx)
?The weight includes the first stage (DIN fitting), hose and second stage.

We offer free standard delivery on orders over £50.

Standard delivery is £3.70 for orders under £50. You will receive your order 2 - 4 days from the date of despatch.

Next Working Day is £6.50.

For Christmas delivery information, click here Learn more about delivery

We hope you will be completely satisfied with any product purchased from Simply Scuba.

However, you can return it for any reason within 28 days from the date of despatch for a full refund (less postage costs).

For Christmas returns information, click here Learn more about returns

Customer Reviews

Based on 4 reviews Write a review

Watch the video