Tek 3 Twin Set Regs
£735.00 RRP £1,005.00Please note: This item cannot be shipped outside the European Union - learn more
The Apeks Tek3 Regulators are specifically designed for twin sets; each first stage is a one-sided mirror image of the other. Tek3 first stages are made for neater hose routing without excess ports, combined with the XTX50 which can be reversed too.
Popular With Tech Divers because of the Apeks heritage, the ability to customise and adapt your set-up and shear ruggedness of regulators that work in all environments. Apeks analysed tech divers and trimmed out any features that were superfluous.
Left and Right Handed first stages have angled ports that are made to route downward to allow for a streamlined configuration that avoids: snagging, crossing hoses and restricted access to your valves. Each first stage is tapped out of a single piece of metal with a unique over-balanced design that increases performance at depth.
Pneumatically Balanced second stage results in a smooth easy breathe that is user adjustable at depth. The two stage progressive purge button lets you better control how much gas is purged instead of just open and closed.
Active Microbial Protection on the second stage which actively kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae. Molded parts are impregnated with an additive that kills infective microbes that usually survive well in wet conditions.
Large Venturi Lever operates the pre-dive mechanism that redirects airflow inside a second stage to interrupt a freeflow.
Outstanding cold water performance (below 10 C / 50 F).
Compatible with EAN40 out of the box.
Compact, solid one-piece body
Unique over-balanced, diaphragm design - as the diver descends, the over-balancingfeature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
1 HP port and 3 MP ports are all angled downward.
An environmental dry system keeps water out of the main spring chamber thus reventing ice buildup and keeping silt and contamination out.
Maximum working pressure is 300 BAR (4350 psi).
Pneumatically-balanced second stage results in smooth, easy breathing.
The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.
The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
Easy-to-grip opening effort control knob keeps the diver in control.
The second stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
A silicone exhaust valve improves the breathing performance of the regulator.
The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue.
A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water
- Connections DIN only
- Type of first stage Over-balanced diaphragm design, environmentally sealed
- Body Type Compact, solid one piece body
- Number of HP ports 1 (7/16" UNF)
- Number of MP ports 3 (3/8" UNF)
- Environmental Dry Kit Standard
- First stage exterior Chrome over marine brass
- Orientation Convertible LH or RH
- Coldwater Use Yes
- Type of second stage Pneumatically balanced
- Opening Effort Control Knob Yes
- Integrated Venturi Lever Yes
- Mouthpiece Comfo-bite™
- Exhaust tee Diver Changeable - comes with 2 sets
- Heat Exchanger for freezing resistance Yes
- Overall work of breathing (WOB) scores Avg. 0.70 joules/liter
- Nitrox compatible Yes to 40% O2 when new, out of the box
- 1x LH TEK3 first stage
- 1x RH TEK3 first stage
- 2x XTX50 second stages
- 1x 2 meter hose
- 1x standard length hose
- 1x regulator necklace
- 1x bungee necklace
Approx weight : 2.3kg
We offer free standard delivery on orders over £50. Learn more.
Standard delivery is £3.70 for orders under £50. You will receive your order 2 - 4 days from the date of despatch.
Next Working Day is £6.50.
We hope you will be completely satisfied with any product purchased from Simply Scuba.
However, you can return it for any reason within 28 days from the date of despatch for a full refund (less postage costs).
Extended Christmas Returns
Orders placed between the 1st of November and the 15th of December (inclusive) will be subject to an extended returns period. You will be able to return items purchased during this period up until the 12th of January.