Flexi 1m Hose
Out Of Stock
The Apeks Flexi 1m Hose is a braided regulator hose that is both lighter and more flexible compared to a traditional rubber hose. Standard 3/8" male thread on the 1st stage side mean this will fit most first stages except a rare few and the 9/16" female end will fit any standard 2nd stage that doesn't have a swivel joint or unique fitting.
1.0m is a good length for an octo hose, hence the yellow colour, so you have enough slack to donate to a diver face-to-face but not too much slack that the hose becomes a hazard.
100cm is also a good length for a drysuit hose from a single cylinder. All you need is a connector to turn this into a QD LPI Hose.
Longer hoses are usually prefered for an alternate hose so you can donate to a diver and have some space to move. For a single cylinder primary donate most divers use a 150cm Rubber hose or a Flexi Hose. For twins on a similar DIR setup 210cm is prefered and is available in a Flexi Option.
Apeks Flexi 1m Hose - Features
?This is the tread that the regulators second stage or pressure gauge will screw into.
?This is the thread on the hose that will screw into the regulators first stage
We offer free standard delivery on orders over £50.
Standard delivery is £3.70 for orders under £50. You will receive your order 2 - 4 days from the date of despatch.
Next Working Day is £6.50.