It looks like you're visiting us from outside Italy
30 GIORNI PER I RESI
VALUTAZIONE 5 STELLE
FEEDBACK DEL CLIENTE
RIVENDITORE DELL'ANNO
10 ANNI CONSECUTIVI
| Body | Braided |
| Dive Type | Scuba Technical |
| Female Thread | 9/16 |
| Hose Type | Regulator |
| Male Fitting | 1/2 |
non ci sono ancora recensioni per questo prodotto
Black
| Length (mm/cm) |
|---|
| 60 cm |
| 90 cm |
| 210 cm |
Regulator Hoses Fittings Regulator hoses come with a couple of different styles of fittings, as standard, and these are as follows: Standard 3/8” male UNF (to connect 1st stage) with a 9/16” female UNF (to connect to 2nd stage) This is used by the majority of diving manufacturers. The majority of our range of regulator hoses utilise this fitting combination. ½”male UNF (to connect to 1st stage) with a 9/16” female UNF (to connect to 2nd stage) This is a style of regulator hose, used by a number of diving manufacturers for their primary supply. Including: Apex ATX50, ATX100 & ATX200 Mares Abyss 22 & Prestige 22, If you are in anyway unsure on your requirements, please check with your local dive store/service centre or with your diving equipment manufacture.
