It looks like you're visiting us from outside Italy
30 GIORNI PER I RESI
VALUTAZIONE 5 STELLE
FEEDBACK DEL CLIENTE
RIVENDITORE DELL'ANNO
10 ANNI CONSECUTIVI
| Body | Braided |
| Dive Type | Scuba Technical |
| Female Thread | Quick Disconnect |
| Hose Type | Inflator |
| Male Fitting | 3/8 |
non ci sono ancora recensioni per questo prodotto
Green
| Length (mm/cm) |
|---|
| 56 cm |
| 60 cm |
| 65 cm |
| 75 cm |
| 90 cm |
Inflator Hose Fittings Our inflator hoses are supplied fitted with a standard Seatec style fitting, with an internal schraider type valve and a 3/8” UNF male thread (to connect to the 1st stage). This style of fitting is fully serviceable with a replaceable schraider valve. These are available from us as are all replacement O-rings for all Miflex hoses. Our inflator hoses are suitable for the majority of BCD’s & Drysuit applications where a standard quick release coupler is utilised, but there are a range of fittings that require a different Quick Disconnect fitting. For example breathing applications and different style of inflator / non breathing applications. BCD/Inflator Hoses – Xtreme Performers Light and extremely flexible. A multi-layer construction hose. An average longer lifespan than traditional hoses. Excellent resistance to abrasion. Kink-resistant design – tie an XTREME hose into a knot and air flow remains continuous. A burst pressure more than twice that of traditional hoses. 30 individual safety tests made during production on every hose. Miflex premium packaging which doubles as a water resistant Dry Bag. Approved and certified to EN250 with standards exceeding these requirements. Miflex hoses are fully recognisable with our name clearly shown on every fitting, as required under EN250 for product traceability. We supply directly to a number of the major brands of diving equipment. Included with every hose are the official Miflex Manufacturers User Information and Warranty Guide. Available in the with the following standard fitting configurations 3/8” UNF male x Quick Disconnect coupler – standard seatec style
