Miflex

Miflex Carbon Hd High Pressure Hose

Carbon

AU $64.82 - AU $87.10

Item code: 356521

DELIVERIES ARE RUNNING AS USUAL

Choose size
  • 15cm SUB410.0150-Carbon AU $64.82

    Despatched immediately

  • 20cm SUB410.0200-Carbon AU $64.82

    Out of stock

  • 80cm SUB410.0800-Carbon AU $74.95

    Despatched immediately

  • 90cm SUB410.0900-Carbon AU $76.97

    Despatched immediately

  • 100cm SUB410.1000-Carbon AU $79.00

    Out of stock

  • 120cm SUB410.1200-Carbon AU $87.10

    Despatched immediately

Product Sizing Chart
  • Details
  • Reviews

Miflex

Miflex Carbon Hd High Pressure Hose

Carbon

AU $64.82 - AU $87.10
Manufacturers Description

Information

The Miflex Carbon HD Hose is a lightweight braided hose to connect your 1st stage and SPG made from a tougher material than before. Miflex hoses have a higher burst pressure than traditional rubber hoses, are much lighter and more flexible than rubber hoses. Miflex hoses also have a tighter braid compared to other braided hoses which makes them more resistant to abrasion and kink resistant. all you need in-between is a swivel pin that will either come with your SPG or can be bought separately here.

Trustworthy

The external nylon safety braiding is designed to resist the snags and abrasions that divers can often encounter. The patent-pending XTREME double braiding also resists UV rays out of the water, thus extending the lifespan of the hose.

Unlike traditional hoses, the XTREME nylon safety braiding is not simply pushed over the hose fittings. Instead the braiding is tightly bound and fixed to the hose core by stainless steel or brass sleeves.

Carbon HD

This range of high pressure hoses are tougher and more flexible than traditional rubber hoses aimed at the frequent diver in harsh environments to resist bumps and scratches on wrecks and rocks. Each hose has a Test Burst Pressure of > 2000 Bar (EN250 requirement >1250 Bar) and a pull-out test of > 250kg (EN250 requirement >100Kg) so they meet and exceed the current EN250 requirements.

A swivel pin (a small metal tube with an o-ring at either end) is required between this hose and a gauge in order to correctly seal. If you are unable to reuse the pin from an existing hose a replacement will be required

Please Note this hose DOES NOT INCLUDE a HP Swivel. They are usually supplied with SPGs

Standard 7/16"

Features:
  • Lightweight
  • Flexible
  • Kink-resistant
  • 7.5mm Diameter
Body Braided
Dive Type Scuba
Technical
Female Thread 7/16
Male Fitting 7/16

Product ratings


No reviews for this product yet