The Suunto CB Two In Line has a submersible pressure and Depth gauge mounted within a modular design housing that allows the additional and modification of the layout by adding extra gauge or dive computer modules as needed.
Modular Design can easily add or remove sections in the future to reflect your diving; you can add a compass on the end or on the back as all three sections have the same fittings, all held together with simple cross-head screws.
Linear Scale SM-36 Gauge with a red indication area between 50-0 bar. A reducing green hatch pattern is shown from the max 360 down to 100 bar. The gauge has a phosphorescent dial which can be activated by shining torch light on to the gauge, causing the gauge to glow and be read in low light conditions.
Incorporated Attachment Loops at the end and either side of the hose entry point and at the point. A Miflex braided hose is included which has a higher burst pressure and is much lighter than traditional rubber hoses.
- Clear, concise and easy to read even in low light conditions.
- Unit can be extended to include an extra computer or compass or to replace a damaged component
- Sturdy and robust.
- Hose Length: 29" (approx)