The Suunto CB One has a submersible pressure gauge mounted within a modular design housing that allows the additional and modification of the layout by adding extra gauge or dive computer modules as needed.
Modular Design can easily add or remove sections in the future to reflect your diving; you can add a depth gauge or integrate a compass on the end or on the back as all three sections have the same fittings, all held together with simple cross-head screws.
Linear Scale SM-36 Gauge with a red indication area between 50-0 bar. A reducing green hatch pattern is shown from the max 360 down to 100 bar. The gauge has a phosphorescent dial which can be activated by shining torch light on to the gauge, causing the gauge to glow and be read in low light conditions.
Incorporated Attachment Loops at the end and either side of the hose entry point and at the point. A Miflex braided hose is included which has a higher burst pressure and is much lighter than traditional rubber hoses.
31 October 2005
I brought this pressure gauge as I wanted to combine it with my Gekko dive computer, it works very well and was very easy to add my computer to (with an inline housing)
18 March 2008
Nice neat SPG, if not the smallest one on the market. Modular design allows for extra bits to be added.
18 August 2008
good quality.
15 October 2008
It's a pressure guage, it reads pressure, small neat and light.
18 February 2010
Great gauge for my Pony. Did not want a button gauge as if I move to twin set later this will be perfect. Building up experience slowly with kit in mind!
17 October 2019
Great little gauge, just as I expected. Nice to have the braided hose and attachment points and the modular design which would let me add my suunto zoop or a depth gauge is cool. I used this in the pitch black of the inside of the zenobia and the Glow-in-the-dark effect made it really easy to read without a light
- Colour: Black
| Size (Unisex) |
|---|
| One Size |
