It looks like you're visiting us from outside United Kingdom
FREE STANDARD UK DELIVERY
ON ALL ORDERS OVER £50
5 STAR RATING
CUSTOMER FEEDBACK
PAY WITH KLARNA
ON UK ORDERS OVER £100
The Santi 6Ah Battery is a compact external battery to power your heated undersuit or smaller accessories. A 2" retainer is built into the body of the 6Ah Battery so that it can be threaded neatly onto your waistband. The modern Li-Ion cell is light and efficient at supplying a constant power. You have full control over the power supply in the water thanks to the Piezo switch that doesn't use moving parts, reducing the chance of failure.
Who is the 6Ah For?
The 6Ah Battery is for divers with smaller heated undersuits, like the vest and gloves, who don't want a huge battery on their hip. The 6Ah is nice and compact and can deliver a decent burn time for smaller heated undersuits under 100W. For a full-body heated undersuit the 24Ah battery would have longer burn times.
Burn Times
| Dive Type | Technical |
| Diving Depth | 100.00 m |
| Heating | Yes |
| Height | 11.5 cm |
| Width | 7.4 cm |
No reviews for this product yet
Black
| Size |
|---|
| One Size |
SANTI 6Ah battery is based on modern Li-Ion cells with high discharge current, so that it is possible to connect elements with a total power of up to 100W. The battery is enclosed in an ergonomic case, with the E/O cord connection cable and piezo switch fitted through the upper lid of the container. The battery is switched on by touching the flat switch on the lid and the operation is signaled by a blue backlight placed on the E/O cord connector. The container is equipped with a special opening, designed to secure the battery pack on the belt. The battery is intended to work with a heated vest and gloves from the SANTI Heating System. There is also the possibility to use the battery with any torch if its power does not exceed 100W. Estimated operating time for power supply of individual components: heated gloves: 1h45min ~ 2h, heated vest: 1h15min ~ 1h30min, vest with gloves: 30 ~ 45min. The battery should be connected with the chosen heating element through the SANTI connector or SANTI Thermovalve by using the E/O cord connector. When storing, the battery should remain turned off. It is recommended not to leave the battery discharged for more than 6 months. To avoid the electrolysis process, the battery should not be switched on in the water while the E/O cord is not connected to any receiving device. Details: light, small and ergonomic container, E/O cord connector with unique LED signalling, trouble-free piezoelectric switch, belt loop (no need for clamps), charging via E/O cord connector, the possibility of using for both the SANTI Heating System and flashlights. Technical parameters: capacity: 6Ah, operating voltage 11,1V, cells type: Li-Ion, height: 115mm, diameter: 74mm, special groove for silicone band placement, E/O cord lenght: 60cm, material: Poliacetal / POM / Delrin®, charging time: 4-5h, operation depth: 100m, weight: 0,68kg. NOTE! Works only with SANTI Thermovalve and SANTI Connector.
