It looks like you're visiting us from outside United Kingdom
FREE STANDARD UK DELIVERY
ON ALL ORDERS OVER £50
5 STAR RATING
CUSTOMER FEEDBACK
PAY WITH KLARNA
ON UK ORDERS OVER £100
The Miflex XT-Tech QD Hose is a modern hybrid between a braided hose and a rubber hose. Lighter than a traditional rubber hose but not as buoyant as a braided hose the XT-Tech don't float so will route better and stay where you want them. An external coating protects the braiding and makes the hose smooth outside so it doesn't rub against your skin.
If you're looking to replace a worn hose or configure your regs to exactly how you want them the XT Tech is a great range to look at. Made for both technical and recreational divers who want a lightweight hose that doesn't float, the internal Polyether based PU core transfers gas and is protected by a Kevlar reinforced braid and a smooth PU outer layer.
| Body | XT-Tech |
| Dive Type | Scuba Technical |
| Female Thread | Quick Disconnect |
| Hose Type | Inflator |
| Male Fitting | 3/8 |
No reviews for this product yet
Black
| Length (mm/cm) |
|---|
| 56 cm |
| 60 cm |
| 71 cm |
| 75 cm |
| 90 cm |
The XT-Tech series of medium pressure flexible scuba diving hoses, have been developed with the main purpose to offer technical divers additional safety with Kevlar reinforcement in the inner braiding, combined with a smooth outer PU layer. For Technical Divers Lightweight Inner core of Polyether based PU Smooth Outer Layer Kevlar Reinforcement Not Positively Buoyant Complies with EN250 Miflex Quality Manufacturing This new XT-Tech hose configuration from Miflex, as it is not positively buoyant, is particularly appreciated & enables less abrasion around the neck, so allowing the hose to stay in place. The XT-Tech series of diving hoses, offers the same characteristics of the traditional rubber hose, with the plus of being much lighter in weight. This multi-layer design of hose has a polyether based PU thermoplastic inner liner, braiding of Polyester & Kevlar and an outer smooth layer of thermoplastic. The fittings & their sleeves are made of sea water resistant electroless nickel plated brass. All Miflex XT-Tech hoses are supplied in re-usable drybag packaging & are complete with manufacturers user & warranty information. All Miflex Specialist Diving Hoses comply with the EN250 standard & are available in both regulator & jacket/inflator styles. XT-Tech Technical Diving BCD/Inflator Hoses are initially available in a limited number of lengths with a standard fitting configuration of 3/8” male x 9/16” female. Code Length SXT.950.0560 56cm (22”) SXT.950.0650 65cm (26”) SXT.950.0750 75cm (30”) SXT.950.0900 90cm (36”)
