8 April 2019
A simple, easy to unfold and deploy lift bag, strong and more than adequate for catch bag needs.
It looks like you're visiting us from outside United Kingdom
The Mares XR Lift Bag is a tough and reliable lift bag with a 30kg/80Lb lift capacity. This closed cell buoy can be used for salvage and signaling or redundant lift and emergency flotation. The Dump Valve line is run down the length of the bag for easy and quick buoyancy control.
Tough and Reliable
Each seam is welded and double stitched and the pressure relief valve prevent the bag from over inflating and tearing. Closed Cell design mean the bag will only deflate when you want it to delflate.
Quick and easy inflation uses a standard low pressure inflator valve similar to your BCD and drysuit for trouble free inflation. Convinient stainless Steel D-Ring at the top and bottom of the bag allow quick and easy attachment.
Bungee loop on the bottom lanyard wraps the buoy into a small size for easy stowage.
Bottom | Closed |
LPI Inflation | Yes |
Message Pouch | No |
Oral Inflation | No |
Reflector | No |
Seams | Double |
8 April 2019
A simple, easy to unfold and deploy lift bag, strong and more than adequate for catch bag needs.
Orange
Size |
---|
One Size |
The lifting buoy was designed by Mares for your retrievals in the water. Its capacity to lift 30 kg and the overpressure valve make it your ideal buoy. The key features of the Lifting Buoy are: • Double stitched and welded • Lifting capacity 30kg • Available in orange - easy to notice for air or surface traffic • Non-return valve for low pressure or mouth inflator connector • Stainless steel D-ring on top and lower and elastic fixed on the bottom • Overpressure valve (opv) that allows precise adjustments during lifting operations with long and accessible knob • With mouth closed - eliminates the possibility that gas can escape from the lifting buoy during ascent or in surface