The Finn Light 2000 Short is a small but powerful primary torch with a tight 5° beam and 2000 lumens to cut through murky waters. Two and a half hours burn time at full power and 24hrs at 10% you have full control of the torch and can conserve battery power when you don't need it. Attached to a handle you can still use your hands while holding the torch securely and the small size make it convinient when you're not using it.
The 2000 Short has all the benefits of it's predescesors including a long run time, a bulb that produces little heat so you can use the light on the surface when on 10% and three power settings give you control.
Tight Beam Angle
Most of the light is focused into a tight 5° beam to cut through the water and is great for signaling but a halo around that will illuminate the dive site without blinding your buddy.
Heat treated Aluminium Alloy is both light and strong as well as corrosion resistant. Anodized with a hard Eloxal Coating that acts as a shield to the usual abrasion a torch can go through.
Borosilicate Glass protects the front of the light from changes in temperature and is hard itself.
single LED 2000 lumen
View product manual
5° focus beam
clear spot for effective signaling
3 modes of operation - 2000lm / 1000 lm / 200 lm
running time - 2,5 h in 2000 lm mode, 5 h in 1000 lm, 24 h in 200 lm
discharging and overcharging protection
resistant aluminium alloy body
anatomic Goodman handle
operational depth up to 200 m (655 ft)
weight on surface 760 g including handle
weight under water 300 g