Message Icon


Message Icon


Message Icon



Apeks WSX-25 Sidemount Harness Harness


£619.65 £729.00

Item code: 310868

  • Details
  • Reviews


Apeks WSX-25 Sidemount Harness Harness


£619.65 £729.00


The Apeks WSX-25 Sidemount Harness is a one-size-fits-all sidemount rig with a low profile wrap-around bladder with a customisable 2" webbing harness. The whole rig is modular, made from high grade materials and has a very minimalist design. After 11/08/2017 the WSX-25 will have an updated bladder with an upper dump valve.


Trapezoid Wraparound Bladder is made to be low profile and snag resistant so you can fit through smaller gaps with ease. The bladder can be removed and moved up and down the spine to suit you or left off completely. The trapezoid shape keeps any buoyancy in the small of your back for good trim and the two sides wrap around the diver with a bungee loop around the front. The inflator hose can be mounted on the left or right and pass up under the arm connected to a shoulder D-Ring. A central pull dump lets you dump air in a horizontal position.


Integrated Weights along the spine under the bladder hold lead and can be moved up and down the spine for trim. You can also thread solid lead blocks over the shoulders if you need to shift weight further forward.


Remember to validate your warranty by visiting the manufacturers warranty registration | website



  • 27lbs lift
  • Armoguard exterior
  • Additional protective layer of Armoguard protects the bladder against abrasions in confined spaces
  • Reversible inflator can be mounted on left or right side
  • Grommets at lower corners allow for mounting bungee to keep the bladder streamlined to your body


  • Solid 2" (5cm) webbing comes pre-assembled
  • Removable crotch strap made of 2" (5cm) soft webbing
  • 4x two inch stainless steel D-rings (2 angled on shoulders, 1 angled and 1 flat on the crotch strap)
  • 2x "SlideLock" sliding stainless steel D-rings on waist strap allow for easy adjustment of cylinders throughout the dive
  • 2x stainless steel drop D-rings along the lower back are for connection to the the included butt pack, or for marker buoys, reels or other accessories
  • Heavy-duty waist buckle made of stainless steel
  • Two-piece stainless steel plate allows the torso length to be adjusted to fit any diver
  • Zippered Butt Pack with stainless steel snap hooks included
  • Weight pouch is mounted on the spine strap and holds over 18lbs (9kgs) of weight
  • Comes complete with 2 sizes of bungee and 5 stainless steel snap hooks
  • 2 grommet strips allow the diver to adjust the weight pouch and bladder based on their specific requirements

Bladder Material

  • Armoguard


  • One size fits all

Plate System

  • Two piece stainless steel


  • Stainless steel / total of 6

Waist buckle

  • Stainless steel

Accessory butt pack Included

Airway holddown Bungee with bolt snap

Crotch strap Yes, removable

Bungee Yes, 2 sizes of bungee are included

Weight pouch 3x 3kgs (18lbs)

Grommet strip 2 included

Dive Type Technical
Sidemount Yes

Product ratings

4 September 2017

Excellent price, very fast delivery to France (2 day!). I am very satisfied.

21 December 2017

I love this harness, but a dump valve at the top of the bladder would make descending someone earlier. Also, Apeks: please consider including even rudimentary assembly instructors, they would be very helpful. Otherwise, the quality is good, the customisation is good, but the thick bungees are too soft.

26 March 2019

From the beginning it was a great experience from shopping online to asking questions and once I got the product I knew I made the right choice, it comes packed with everything you need and the quality is amazing. Its the best sidemount bcd I've owned so far!!

By entering your email address above you explicitly consent for us to hold your data in accordance with our Privacy Policy