Home > Scuba Cylinders > Scuba Cylinder Accessories >

Custom Divers Twin Tank Lift Bar Reviews

Custom Divers Twin Tank Lift Bar

£104.00	RRP £113.00 save 8%
The cylinder lift bar is designed to comfortably lift twinned cylinders on both manifoldedand non-manifolded systems. Fitting the lift bar will prevent stress to the manifold itself and o-ring seats. For manifolded tank configurations the lift bar is positioned just below the manifold and therefore takes the full weight of the cylinders. The fully adjustable system allows fitting to twinned 7ltr to 20ltr tank configurations.

This is what our customers thought of the Custom Divers Twin Tank Lift Bar

Average reviews

Excellent

0 customers

Very good

0 customers

Good

0 customers

Average

1 customer

Poor

0 customers

Average ratings

Sorry there are no average ratings for this product.

Average fitment

Sorry there is no information on how this product fits.

Latest reviews for the Custom Divers Twin Tank Lift Bar

3
out of 10

Steve Cain

22 May 2005

I have used the Twin Tank Lift with 2 x...

I have used the Twin Tank Lift with 2 x 12ltr (tall) tanks on a Buddy Tek-wing. The separation between the tanks is set by the Separation Blocks on the Wing at approx 2.5cm. The 2 tank collars are fitted such that mounting pillars are at their closest point and the handle is adjusted for a snug fit. This means that the handle is now such that it is very close to its maximum length with only approx 6mm of thread holding the two pieces together. The handle should ideally be a couple of cm longer, it feels very unsafe when carrying twin 12's.

Recommend to a friend? No

Was this review helpful? Yes / No